Amphony 1550 - Manual (Page 3)

Main features Main features
CD
Quality
No Audio
Compression
Noise
Shaper
Error
Correction
Digital audio transmission at full CD quality
Noise shaping filter for maximum signal-to-noise ratio
Error correction
No audio compression
Digital audio transmission at full CD quality
Error correction
Noise shaping filter for maximum signal-to-noise ratio
No audio compression
5.8 GHz DIGITAL Wireless Audio Transmitter / Amplifier, Model 1550 5.8 GHz DIGITAL Wireless Audio Transmitter / Amplifier, Model 1550
Technical specifications
Transmitter:
Amplifiers :
Audio transmission method: Digital (Audio is transmitted as PCM sample data)
Transmitter frequency: 5.8 GHz
Signal-to-Noise ratio (A-weighted): typ. 91 dB
Dynamic range: typ. 91 dB
Error correction: 1/2 rate FEC
Audio sampling method: 128 times oversampling
Transmitted data rate: > 3 Mbps
Overall audio latency: < 1 ms
Transmitter operating range: max. 200 ft. line of sight, max. 50 ft. through walls and ceilings
Content: Each receiver contains a mono digital amplifier
Output power: 2 * 50 W (2 * 30 W rms)
Total harmonic distortion: typ. 0.05 % @ 25 W
Power efficiency: typ. 75 %
Frequency response: 2 Hz - 23 kHz
Channel separation: typ. 94 dB
Dimensions: 5 x 3.5 x 2 inches