Epson 1200S - Manual (Page 94)

87
If your image scans at an angle . . .
Check the position of your source
document. It may be placed at an
angle on the document table. Align
it so the horizontal and vertical edges
are carefully aligned with the scales
on the top and side of the document
table.
If the edges of the document are
not scanned . . .
■
Check the position of your source
document. Adjust your
document’s position so that the
image is within the glass area.
■
The document table has
non-readable areas around the
edges. If part of your document
extends beyond the maximum
limits marked on the document
table edge guides, you may have
to reposition your document so
that the image you want to scan is
within the readable area.