AMT Datasouth 5106 - Manual (Page 12)

4
2.3 Parameter Setting Mode
To enter the parameter setting mode, perform the following operations. Refer to the
parameter tree, page 8 for 1.90 settings.
•
Press [ON LINE] to toggle to “Off-line” mode if the printer is On-line.
•
Press [MODE/MENU] to enter the parameter setting mode.
•
The following keys are provided for the parameter setting operations.
[MODE/MENU]
§ Enters parameter setting mode.
§ Returns to the branch menu from data setting mode.
§ Returns to “Off-line” mode after selection of the following:
[ENTER] to save as new defaults
[ENTER] to exit without saving
[ENTER] to restore factory default
[ENTER] to restore previous default
[ / ]
§ Moves among the top of the branch mode when the display shows branch
mode titles listed here.
- Print parameters - I/O configuration
- Label parameters - System parameters
- Time set
§ Selects data in each parameter when the display shows the parameter
name.
[й/к]
§ Moves among the parameters in each branch mode.
[ n ]
§ Numeric keys have two functions : one numeric in the first input activates
key entry for data change, two or three digit numerics following previous
input is data to be changed.
[
ENTER/PRINT]
§ Pushed input data into the buffer after this key is depressed to select or
input data. At this moment, this key just lets the printer know which data
is input and the printer does not store new data yet.
§ Decides on the selection when the display asks next action.
§ Stores data into the memory when this key is depressed following to data
input.
•
Date and time should be set ON.