Alliance Laundry Systems FLW1525C - Manual (Page 19)

Operation
17 802951 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 3: Add Laundry Supplies
Open dispenser drawer. Measure and add low sudsing,
high efficiency (HE) detergent (1), bleach (2) and
fabric softener (3) to the dispenser drawer (refer to
Figure 17). Close dispenser drawer.
IMPORTANT: If using non-HE detergent, avoid
oversudsing by using 1/2 of the detergent
manufacturer’s recommended amount.
Figure 17
Step 4: Set Fabric Selector
Push touchpad for NORMAL, PERM PRESS or
DELICATES/BULKY cycle. Light indicates
selection.
NOTE: Changes can be made to Fabric Selector
setting up until the first fill is complete.
Figure 18
Step 5: Set Wash Temperature
Push touchpad for HOT, WARM or COLD. Light
indicates selection.
NOTE: Always follow manufacturer’s care labels.
Figure 19
FLW2236N
1 Detergent
2 Bleach
3 Fabric Softener
FLW2236N
1
3
2
68 59 42
Dispenser drawer requires a special tool
for removal. Contact a service person if
removal is necessary.
W236
CAUTION
FLW2228N
FLW2229N