ALESIS QS7 - Manual (Page 51)

Editing Programs: Chapter 6
• When you want to layer more than four voices. In Mix Play Mode, it is possible
(though not advisable) to stack all 64 voices onto a single key.
• When each sound is likely to be used by itself by other setups. For example, if
you are programming three different keyboard splits, each of which uses the
same left-hand bass patch, it makes sense to use Mix Play Mode.
• When you want different sounds to respond to different MIDI channels.
QS S
IGNAL
F
LOW
T HE F OUR S OUNDS OF A P ROGRAM
Each Program is made up of at least one to four sounds. A sound is made up of
several components including a voice (the original sound material) which passes
through a low-pass filter and an amplifier. The voice, filter and amp modules each
have direct modifiers (Pitch LFO, Filter LFO, Amp Envelope) which affect how each
will function in the Program. You can layer these sounds together, or divide them into
regions of the keyboard, or a combination of these things.
The following diagram illustrates the signal flow within each QS Program.
When editing a Program, use the [00] - [30] buttons to select the sound layer you
want to edit.
Let’s look at each module’s function in detail.
QS7/QS8 Reference Manual 49