AGFA sensor 500-X User Manual
Page 11
6
Low Battery Indicator
A low battery indicator
appears on the LCD screen when the batteries are nearly
exhausted. Batteries should be replaced promptly when the low battery indicator
appears.
y There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to instructions.
y Be sure to turn off the camera power before inserting or removing batteries.
y Use only Alkaline or NiMH batteries to power this camera. Use of any other type
of battery is not recommended.
y Replace all batteries at the same time. Never mix old and new batteries.
y Remove batteries if you will not be using the camera for a long time.
y The camera body may feel warm after extended use. This is normal.
Inserting a Memory Card
You can use an SD card card with this digital camera. The memory card slot is adjacent
to the battery compartment.
Open the battery cover.
Slide the battery cover in the
direction indicated by the arrows.
Insert the card.
Insert the card with the label facing
up and the arrow pointing inwards.
y To remove the card, gently press on the edge of the card to release it. Pull the
card out and close the battery cover.
Close the battery cover.
3
C
C
a
a
u
u
t
t
i
i
o
o
n
n
1
2
T
T
i
i
p
p
s
s