Axiom Audio Electronic Keyboard - Manual (Page 46)

Axiom Line User Guide
45
English
Appendix G – Assignable Controller Numbers to Pressure Pads
This table only applies to the pressure Pads on your Axiom.
MIDI CC Description Data 1 Data 2 Data 3
0-119 Standard MIDI CC's - MIN MAX
120-127 Channel Mode Messages - MIN MAX
128 Pitch Bend Range - - -
129 Channel Fine Tune - - -
130 Channel Coarse Tune - - -
131 Channel Pressure - - -
132 RPN Coarse - RPN LSB RPN MSB
133 RPN Fine - RPN LSB RPN MSB
134 NRPN Coarse - NRPN LSB NRPN MSB
135 NRPN Fine - NRPN LSB NRPN MSB
136 Master Volume GM* - - -
137 Master Pan GM* - - -
138 Master Coarse Tune GM* - - -
139 Master Fine Tune GM* - - -
140 Chorus Mod Rate GM2* - - -
141 Chorus Mod Depth GM2* - - -
142 Feedback GM2* - - -
143 Send to Reverb GM2* - - -
144 Pitch Bend - Pitch bend MIN Pitch bend MAX
145 Program Change - Program -
146 MIDI CC (On/Off) - MIDI CC On Value (Off value is 0)
147 Note (On/Off) - Note Locked Velocity
148 Note (On/Off toggle) - Note Locked Velocity
149 MMC Command** - - -
150 Reverb Type GM2 * - - -
151 Reverb Time GM2 * - - -
152 Chorus Type GM2* - - -
153 MIDI CC Decrement - MIDI CC End Value
154 MIDI CC Increment - MIDI CC End Value
155 Program Decrement - Start Value End Value
156 Program Increment - Start Value End Value
*** Controller Off*** - - -
* SysEx messages - for details please see section 3.6.7.2.
** MMC SysEx messages, for details please see section 3.8.2.
*** This value cannot be typed in using the numeric keypad. Type in 0 and then press the - button to set this value.