Allied Telesis x310 Series - Manual (Page 54)

Chapter 2: Beginning the Installation
54
Figure 16. Components of the AT-x310-26FT Switch
One wall or equipment rack mounting bracket
One 2 m (6.6 ft) local management cable with
RJ-45 (8P8C) and DB-9 (D-sub 9-pin)
connectors.
Eight bracket screws
One regional AC power cord
Two anchors for concrete walls:
Length: 29.6 mm (1 1/8 in.)
Diameter: 6.0 mm (0.25 in)
Two screws for wood or concrete walls:
Length: 31 mm (1 1/4 in.)
Width: 4.3 mm (1/8 in.)
Power cord retaining clip
One long wall or equipment rack mounting
bracket