Allied Telesis AT-9000 Series - Manual (Page 66)

Chapter 4: Setting Port Parameters
66
Displaying the Storm Control Settings
To display the storm control settings, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 20 on page 59.
2. From the Switching tab, hover over Port.
The Port tab expands to the right.
3. From the Port tab, move the cursor to the right and select Storm
Control.
The Storm Control List page is displayed. See Figure 23.
Figure 23. Storm Control List Page
The following fields are displayed:
 Interface— Port number.
 Broadcast— Indicates whether Broadcast storm-control setting is
enabled (ON) or disabled (OFF).
 Broadcast Level— Maximum number of ingress packets per
second of broadcast packets the port will forward. The range is 0 to
33,554,431 packets. The default is 33,554,431 packets.
 Multicast— Indicates whether Multicast storm-control setting is
enabled (ON) or disabled (OFF).