Allied Telesis SwitchBlade x8112 - Manual (Page 136)

Chapter 6: Installing the Transceivers and Cabling the Ports
136
Installing AT-SP10TW Cables in the AT-SBx81XS6 Line Card
This procedure explains how to connect AT-SP10TW Cables to the AT-
SBx81XS6 Line Card. The cables may be used in place of fiber optic
cables and transceivers for 10 Gbps links of up to 7 meters.
Note
The AT-SP10TW Cable is only supported in the AT-SBx81XS6 Line
Card. It is not supported in the AT-SBx81GS24a Line Card.
To install the AT-SP10TW Cable, perform the following procedure:
1. Remove the dust plug from the SFP+ slot chosen for the cable, as
shown in Figure 90.
Figure 90. Removing the Dust Cover From an SFP+ Slot in the AT-
SBx81XS6 Line Card