Allied Telesis AT-GS950/16 User Manual
Page 51
Advertising
AT-GS950/16 Web Interface User Guide
51
3. From the SSL Settings field, select one of the following choices from
the pull-down menu:
Enabled - The secure SSL mode is active. You must log into the
switch’s management using the HTTPS mode on your browser.
Disabled - The secure SSL mode is inactive. You must log into the
switch’s management using the HTTP mode on your browser.
4. Click Apply.
The SSL setting that you have selected is now active.
5. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
Advertising