Allied Telesis AT-GS950/24 - Manual (Page 218)

Chapter 15: MAC Address Table
218
Static Unicast MAC Address Configuration
This procedure explains how to set the static multicast feature for each
port on the AT-GS950/24 switch.
To add a static MAC address to the switch, perform the following
procedure:
1. From the main menu on the left side of the page, select the Bridge
folder.
The Bridge folder expands.
2. From the Bridge folder, select Static Unicast.
The Static Unicast Address Table Page is displayed. See Figure 81.
Figure 81. AT-GS950/24 Static Unicast Address Table Page
Before continuing, you must create an 802.1Q VLAN ID(s) or a Port-
Based VLAN Index(s). For information about defining these
parameters, go to:
 “Tagged VLAN Configuration” on page 83 regarding the 802.1Q
VLAN ID parameter.
 “Port-Based VLAN Configuration” on page 91 regarding the Port-
Based VLAN Index parameter.
3. Select either the 802.1Q VLAN ID or Port-Based VLAN Index radio
button and enter the respective VLAN ID (1-4000) or VLAN Index (1 -
52).