Allied Telesis AT-S95 WEB User Manual
Page 89
Configuring Device Security
Defining Access Control
Page 89
2.
Click the Add ACL Button. The Add IPv6 Based ACL Page opens:
Figure 51: Add IPv6 Based ACL Page
In addition to the IPv6 Based ACL Page, the Add IPv6 Based ACL Page contains the following fields:
•
Match QoS — Enables or disables the ACL classification to identify flows based on QoS values, such as
DSCP or IP Precedence. The possible field values are:
–
Checked — Enables identification of flows based on QoS values. Selecting this option makes the Match
DSCP and Match IP Precedence fields available.
–
Unchecked — Disables identification of flows based on QoS values.
3.
Define the fields.
4.
Click Apply. The IPv6-based ACL configuration is defined, and the device is updated.
5.
Click Save Config on the menu to save the changes permanently.