Allied Telesis AT-WNP300N - Manual (Page 15)

AT-WNP300N IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter User Manual 15
Installing the Driver and the Utility
To make the adapter work properly, you need to install the driver and the utility. Please perform the
following procedure:
1.
Switch on your PC and insert the CD-Rom, which is contented in the shipping package.
2. When you see the notification as shown in Figure 5, click on “Cancel” to skip the process.
Figure 5: Canceling Hardware Notification
3. Run the CD-Rom. Click on “Install” to start the installation, as shown in Figure6.
Figure 6: Starting the Installation
4. Click on “Finish” when the installation is completed, as shown in Figure 7.
Figure 7: Completing the Installation