Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 23)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 23 of 146
SNMP v3 Settings dialog box
User Account Name
This is the SNMPv3 User Account to be used for accessing the MIB of the target
device. Make sure to specify a User Account that has already been configured on the
target device.
Security Level
This is the Security Level for the User Account Name that you have specified. Make
sure to set the Security Level that is configured for the User Account Name on the
target device.
These are the available Security Levels:
No Auth / No Priv
This Security Level uses no authentication and no privacy.
Auth / No Priv
This Security Level uses authentication without privacy.
Auth / Priv
This Security Level uses authentication and privacy.
Authentication Protocol
If the Security Level is "Auth / No Priv" or "Auth / Priv", you need to specify an
Authentication Protocol that is configured for the User Account Name on the target
device.
These are the available Authentication Protocols:
MD5
Use HMAC-MD5-96 protocol