Allied Telesis AT-S82 - Manual (Page 58)

Chapter 7: Class of Service
58
Setting Up the Schedule
To configure map ports to priority queues, perform the following
procedure:
1. From the main menu, select CoS Output Scheduling.
The CoS Output Scheduling page is shown in Figure 22.
Figure 23. Output Scheduling Page
2. To set the weight for a queue, go to that queue and type a number.
3. Click Apply to implement your changes.
4. To save the settings to the configuration file, from the main menu,
select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 14.
5. Click Apply.