9 integrating alliedview-ems 3.11 with whatsup – Allied Telesis AlliedView-EMS 3.11 INSTALLATION User Manual
Page 20
AlliedView™-EMS 3.11 INSTALLATION GUIDE
Page 20 of 29
9 INTEGRATING ALLIEDVIEW-EMS 3.11 WITH WHATSUP
The AlliedView-EMS 3.11 installer automatically detects if WhatsUp is installed and will perform the
necessary integration so that AlliedView-EMS 3.11 can be started from within WhatsUp. After
integration, the options “AlliedView-EMS Device Manager” and “AlliedView-EMS AMIGO” are added
to the device context menu.
To start AlliedView-EMS for an Allied Telesis device, follow the steps below:
1. Select an Allied Telesis device on the network map.
2. Right click on the device icon then choose AlliedView-EMS Device Manager or
AlliedView-EMS AMIGO.
3. Device Manager or AMIGO will be launched.
Note
- There are two Allied Telesis device icons used in WhatsUp – the “WA7500” device icon used
for the AT-WA750x devices and the “ATI” device icon used for all other Allied Telesis devices.