Allied Telesis AT-S65 - Manual (Page 93)

AT-S65 Management Software User’s Guide
93
Using Xmodem to Update the AT-S65 Management Software
To download a new AT-S65 software image onto a chassis from a local
management session using Xmodem, perform the following procedure:
1. Establish a local management session on the chassis where you
intend to download the new management software.
2. From the Main Menu, select Administration.
The Administration menu is shown in Figure 13 on page 37.
3. From the Administration menu, select Xmodem Software Update to
this System and press Enter.
A message is displayed, as shown in Figure 46.
Figure 46. Xmodem Software Update Message
4. Enter Y to start the download process or N to cancel.
If you enter Y, another message is displayed, as shown in Figure 47.
Figure 47. Xmodem Message
5. Begin the file transfer.
The following steps show how to perform the transfer using Hilgraeve
HyperTerminal.
Ready to receive software update via Xmodem.
Warning: During software updates, management activity is disabled.
Do Xmodem update now? (Yes or No):
The system is now ready for download. Please start your XMODEM transfer.
Use Hyper Terminal’s “Transfer/Send File’ option to select Filename &
Protocol.
Note: Please select ‘1K Xmodem’ protocol for faster download . . .