Allied Telesis AT-MCR12 - Manual (Page 36)

Chapter 2: Installation
36
1. Choose the slot in the AT-MCR12 chassis where you want to install
the AT-CV1000 chassis and loosen the captive screw to remove the
mounting rail from that slot, as shown in Figure 11.
Figure 11. Removing the Mounting Rail from a Slot in the AT-MCR12
Chassis
2. Turn the AT-CV1000 chassis upside down.
3. Turn the AT-CVMCR adapter over, align it with the base of the
chassis, and attach it to the chassis with two screws (provided), as
shown in Figure 12.
Figure 12. Installing the AT-CVMCR Adapter on the AT-CV1000 Chassis
1251
MEDIA CONVERTER RACKMOUNT CHASSIS
MCR12
MEDIA CONVER
TER RA
CKMOUNT CHAASIS
PWR A
PWR B
1268
C L A S S 1
L A S E R P R O D U C T