Allied Telesis AT-S84 - Manual (Page 226)

Chapter 18: Port Configuration
226 Section II: Web Browser Interface
Viewing and Configuring Multiple Ports
This procedure allows you to configure the ports on the switch using the
Port Configuration page. This page allows you to view and configure the
parameter settings of all the switch ports at one time.
To configure the ports, perform the following procedure:
1. From the Basic Config menu, select Port Config.
The Port Configuration page opens, as shown in Figure 67. The page
lists all the ports on the switch and their current settings.
Figure 67. Port Configuration Page
2. Adjust the port settings as needed. Not all parameters are adjustable.
The parameters are: