Figure 10: removing the battery insulator – Allied Telesis AT-MCF2012LC/1 User Manual
Page 49
Advertising
AT-MCF2012LC and AT-MCF2012LC/1 Media Converter Modules Installation Guide
49
4.
Remove the insulator labelled “REMOVE BEFORE
INSTALL” from the battery on the media converter
module by sliding it out from beneath the battery clip.
Refer to Figure 10.
Caution
A media converter module is sensitive to and can be
damaged by electrostatic discharge. Wear a
grounding device and observe electrostatic discharge
precautions when removing the battery insulator.
Figure 10. Removing the Battery Insulator
1169b
Battery Insulator
Advertising
This manual is related to the following products: