Allied Telesis AT-CV5PNLx Series Blank Slot Covers - Manual

Overview
The AT-CV5PNLx Series blank slot covers are designed to maintain optimal,
trouble-free environmental conditions for the modules used in the
Converteon™ Series chassis. Every unoccupied slot on the Converteon™
chassis is required to be covered with a blank slot cover, to keep dust from
getting into the chassis and maintains proper airflow, cooling, and ventilation
throughout the chassis.
Related Documents
This installation guide is an abbreviated version of the installation procedure.
For details on the components, features, and functions of this product, refer to
the following documents on our web site, www.alliedtelesis.com:
❑ AT-CV5000 Media Converter Chassis Installation Guide
PN 613-50580-00
❑ AT-CV1000 Media Converter Chassis Installation Guide
PN 613-50582-00
❑ AT-CV1200 Media Converter Chassis Installation Guide
PN 613-000331
Package Contents
Make sure the following items are included in the shipping package. If any
item is missing or damaged, contact your Allied Telesis sales representative
for assistance.
❑ One AT-CV5PNLx Blank Slot Cover
❑ This Installation Guide
The AT-CV5PNLx Series blank slot covers come in three different types of
slot covers:
❑ AT-CV5PNL1 – For Line Cards and AT-CV5M01 Control Processor Module
❑ AT-CV5PNL2 – For Power Supply Modules (AT-CV5000 Chassis only)
❑ AT-CV5PNL3 – For Switch Fabric Module (SFM)/Expansion Slot
(AT-CV5000 Chassis only)
Figure 1 illustrates the AT-CV5PNL1 blank slot cover which is used either for
the Converteon™ line cards or the AT-CV5M01 CPM card.
Figure 1. AT-CV5PNL1 Blank Slot Cover
Figure 2 illustrates the AT-CV5PNL2 blank slot cover which is used either for
the AT-PWR14 or the AT-PWR15 power supply module.
Figure 2. AT-CV5PNL2 Blank Slot Cover
Figure 3 illustrates the AT-CV5PNL3 blank slot cover which is used for the
expansion slot located in the rear of the AT-CV5000 chassis.
Figure 3. AT-CV5PNL3 Blank Slot Cover
222
223
224
Installing the AT-CV5PNLx Series Blank Slot Covers
You can install an AT-CV5PNLx Series blank slot covers whether the chassis
is powered ON or powered OFF.
Note
Always tighten the captive screw to secure the blank slot cover to the
chassis.
Installing an AT-CV5PNL1 Blank Slot Cover
The AT-CV5PNL1 blank slot cover is designed to cover any unoccupied line
card or management module slot in the Converteon™ chassis.
To install an AT-CV5PNL1 blank slot cover, perform the following procedure:
1. Remove the AT-CV5PNL1 blank slot cover from its shipping package and
store the package in a safe place.
You must use the original package if you need to return the unit to Allied
Telesis.
2. Select the line card slot in the AT-CV5000 chassis where you want to
install the blank slot cover.
3. If an Converteon™ line card is installed in the slot, do the following:
a. Disconnect the cables from all the ports in the line card.
b. Cover the fiber optic port with the dust cap.
c. Remove the line card from the slot.
4. Align the back edge of the blank slot cover with the alignment guides
located inside the slot.
For AT-CV5000, align with the top and bottom alignment guides.
For the AT-CV1000, align with the left and right alignment guides.
5. Slide the blank slot cover into the slot, as shown in Figure 4, until the slot
cover is flush with the front of the chassis.
Figure 4. Inserting an AT-CV5PNL1 Blank Slot Cover
225
AT-CM202
LK AT
T
X
ML/SML
FD/OAM
RDY
LK AT
AT-CM202
LK AT
T
X
ML/SML
FD/OAM
RDY
LK AT
AT-CM202
LK AT
T
X
ML/SML
FD/OAM
RDY
LK AT
AT-CM202
LK AT
T
X
ML/SML
FD/OAM
RDY
LK AT
AT-CM202
LK AT
T
X
ML/SM L FD/OA M
RDY
LK AT
CONVERTEON™ Family
AT-CV5PNLx Series Blank Slot Covers
Installation Guide
For use with the Converteon™ Line Cards, Control Process Module,
Rear Expansion Slot, and Power Supply Modules
in the Converteon™ Series Chassis
Allied Telesis, Inc.
www.alliedtelesis.com
2 3 613-50587-00 Rev C 1
*613-50587-00 Rev C*