Installing kickstart on the administrator’s pc – Allied Telesis AT-WA7400 User Manual
Page 47
Advertising
AT-WA7400 Wireless Access Point Installation Guide
47
The Basic Settings page opens, as shown in Figure 17.
Figure 17. Basic Settings Page
Refer to the AT-WA7400 Management Software User’s Guide
for information about how to configure the basic settings.
Installing KickStart on the Administrator’s PC
To install the KickStart utility on the administrator’s PC, perform
the following procedure:
1. Insert the AT-WA7400 Wireless Access Point CD into the CD-
ROM drive on your computer.
The CD’s main page is shown in Figure 11 on page 41.
Advertising