Allied Telesis AT-WCU201G - Manual (Page 37)

AT-WCU201G Wireless Adapter Card Installation Guide
37
In order for the wireless adapter to access one of the networks listed in
Available WANs, you have to configure it with the network’s name and the
appropriate security information. This is referred to as creating a Preferred
WLAN profile. After you have created a profile, the wireless adapter can
connect to the specified network whenever it detects a wireless router or
access point that is a part of the network.
This section contains the following buttons:
ˆ New - You use this button to create a new Preferred WLAN profile
when the network is not listed in the Available WLANs section. For
instructions, refer to “Creating a Preferred WLAN Profile” on page 38.
ˆ Remove - You use this button to remove a Preferred WLAN profile
from the adapter. Once a network’s corresponding Preferred WLAN
profile is removed, the adapter can no longer access that network. For
instructions on using this button, refer to “Deleting a Preferred WLAN
Profile” on page 48.
ˆ Properties - You use this button to view or modify the settings of a
Preferred WLAN profile.
ˆ Reconnect - Prompts the adapter to reestablish a connection to a
Preferred WLAN.
ˆ Move to - This button moves a Preferred WLAN profile to a different
group. For instructions, refer to “Moving a Preferred WLAN Profile” on
page 53.
ˆ Export - This button exports a Preferred WLAN profile into a separate
file for transfer to another computer. For instructions, refer to
“Importing and Exporting Preferred WLAN Profiles” on page 49.
ˆ Import - This button imports a Preferred WLAN profile into the
configuration program. For instructions, refer to “Importing and
Exporting Preferred WLAN Profiles” on page 49.