Allied Telesis AT-S62 - Manual (Page 722)

Chapter 32: PKI Certificates and SSL
722 Section VII: Management Security
Adding a Certificate to the Database
Once you have created a certificate or received a certificate from a public
or private CA, you need to add it into the certificate database to make it
available for use by the switch’s web server. After you add a certificate to
the certificate database, it appears in the X509 Certificate Management
menu.
During the procedure you are asked to specify the certificate’s filename. If
you have forgotten the certificate’s filename, refer to “Displaying System
Files” on page 185.
To add a certificate to the certificate database, perform the following
procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 7 to select Keys/
Certificates Configuration.
3. From the Keys/Certificate menu, type 3 to select Public Key
Infrastructure (PKI) Configuration.
4. From the Public Key Infrastructure (PKI) Configuration menu, type 2 to
select X509 Certificate Management.
The X509 Certificate Management menu is shown in Figure 244 on
page 719.
5. From the X509 Certificate Management menu, type 2 to select Add
Certificate.
The Add Certificate Menu is shown in Figure 246.
Figure 246. Add Certificate Menu
Allied Telesyn Ethernet Switch AT-8524M - ATS62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Add Certificate Menu
1 - Certificate Name .............
2 - State ........................ Trusted
3 - Type ......................... EE
4 - File Name ....................
5 - Add Certificate
R - Return to Previous Menu
Enter your selection?