Chapter 1, Getting started, R 1: getting started – Allied Telesis AT-S65 User Manual
Page 13
13
Chapter 1
Getting Started
The AT-S65 management software for the AT-LX3800U Multi-Service
Transport System allows you to monitor and manage the chassis and the
components installed in it. Some of the functions you can perform with the
AT-S65 management software are:
Review the performance and status of the chassis and line cards
Set up traps to send messages to remote management stations
Configure temperature thresholds for the chassis, line cards, and SFPs
Diagnose problems in the chassis and line cards
The AT-S65 management software is preinstalled on the chassis with
default settings for all operating parameters.
There are three ways to access the management software on the chassis.
These methods are referred to in this guide as management sessions and
are described in this chapter.
This chapter contains the following sections:
“Local Management Session” on page 14
“Remote Management Session” on page 17
“Using the Menus Interface” on page 19