Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 213)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Alarm Config
Displays trap configurations status.
Date and Time
System Date and Time
Displays the current date and time configurations of the system.
Summer Date and Time
Displays the summer date and time configurations of the system.
Note - The current firmware version does not allow the following parameters to be
configured:
o Repeating Start
o
Repeating End
o
Annual Start
o
Annual End
SNTP
Displays the SNTP configuration of the system.
System Log Server Config
Displays basic information and configuration of the System Log Server.
Reset Cold
Performs a hardware reset.
Reset Warm
Performs a software reset.
Note - This function is currently not supported.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit various routing protocols such as RIP, DVMRP,
OSPF, PIM and IPM.
PN 613-50665-00 Rev C Page 213 of 294