Allied Telesis AT-9724TS - Manual (Page 191)

Appendix A - Technical Specifications
General
Standard IEEE 802.3u 100TX Fast Ethernet
IEEE 802.3ab 1000T Gigabit Ethernet
IEEE 802.1 P/Q VLAN
IEEE 802.3x Full-duplex Flow Control
IEEE 802.3 Nway auto-negotiation
Protocols CSMA/CD
Data Transfer Rates: Half-duplex Full-duplex
Ethernet 10Mbps 20Mbps
Fast Ethernet 100Mbps 200Mbps
Gigabit Ethernet 1000Mbps 2000Mbps
Fibre Optic IEC 793-2: 1992
Type A1a - 50/125um multi-mode
Type A1b - 62.5/125um multi-mode
Both types use LC optical connector
Topology Ring
Network Cables UTP Cat.5 for 100Mbps
UTP Cat.3, 4, 5 for 10Mbps
EIA/TIA-568 100-ohm screened twisted-pair (STP)(100m)
Physical & Environmental
AC inputs & External
Redundant Power Supply 100 – 240 VAC, 50/60 Hz (internal universal power supply)
Power Consumption: 90 watts maximum
DC fans: 2 built-in 40 x 40 x 10 mm fans; 1 built-in 60 x 60 x 18 mm fan
Operating Temperature: 0 to 40 degrees C
Storage Temperature: -25 to 55 degrees C
Humidity: Operating: 5% to 95% RH non-condensing
Storage: 0% to 95% RH non-condensing
Dimensions: 441 mm x 207 mm x 44 mm (1U), 19 inch rackmount width
Weight: 3.15 kg
EMC: FCC Part 15 Class A/ ICES-003 Class (Canada)
EN55022 Class A / EN55024
Safety: CSA International
190 Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch