Allied Telesis AT-S62 - Manual (Page 59)

AT-S62 Command Line User’s Guide
59
SET PASSWORD OPERATOR
Syntax
set password operator
Parameters
None.
Description
This command sets the operator’s password. Logging in as operator
allows you to only view the switch parameters. The default password is
“operator”. The password can be from 1 to 16 alphanumeric characters.
Allied Telesyn recommends avoiding special characters, such as spaces,
asterisks or exclamation points, since some web browsers do not accept
them in passwords. The password is case sensitive.
Example
The following command changes the operator’s password:
set password operator
Follow the prompts to enter the new password.