Allied Telesis AT-8500 Series Addendum - Manual

PN 613-50672-00 Rev A 1 Allied Telesyn, Inc.
Addendum
to the AT-8500 Series Installation Guide
(PN 613-50484-00 Rev C)
For a description of the AT-8500 Series of Layer 2+ Fast Ethernet
Switches and for installation instructions, refer to the AT-8500 Series
Installation Guide. This manual ships on CD with the product and is
also available from the Allied Telesyn web site at
www.alliedtelesyn.com.
Item #1:
This correction applies to DC models of the AT-8500 Series and corrects
the Caution on page 66 in the Installation Guide. The Caution should
read as follows:
Caution
It is recommended as a safety precaution that a 15 Amp Listed cir-
cuit breaker be installed at the supply end of the cable to be used
with this LAN equipment.
ALWAYS connect the wiring to the LAN equipment before con-
necting the wiring to the breaker. To avoid the danger of physical
injury from electrical shock, do not work with HOT feeds. Always
be sure that the breaker is in the OFF position before connecting
the wiring to the breaker.
Item #2:
The following Cautions should be added to the section Reviewing Safety
Precautions on page 46. The first Caution applies to all switches. The
last two Cautions apply only to the AT-8524POE switch:
Caution
The unit does not contain serviceable components. Please return
damaged units for servicing.