Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGER - Manual (Page 103)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
• Start Snapshot
RMON Options tab (History Control Parameters)
7.3.7.1 Polling Interval
You can change the polling interval here.
7.3.7.2 Display data type of chart
Specifies how to display data in graphs and charts. You can select one of the following options.
Because RMON histories are collected by RMON agents and AT-View Plus Device Manager
only displays the collected data, settings here are slightly different from other windows. The
Polling Interval here is simply the interval at which AT-View Plus Device Manager gets
collected data from RMON agents.
Absolute Value
Displays the sum of values which AT-View Plus Device Manager got from the RMON
agents, as shown in the following example.
PN 613-50664-00 Rev B Page 103 of 118