Allied Telesis AT-VIEW PLUS 3.1 AMIGO - Manual (Page 30)

Allied Telesyn AT-VIEW PLUS
AMIGO
Setting target devices tab
4.1.6.3 Target Host Property
In the "Target Host Property" dialog box, you can change various properties for a
specific target device by selecting a host, then clicking on the Property button.
Timeout
The time in seconds before AMIGO determines that the target device is
not responding.
Retry count
The number of SNMP messages to send before giving up.
Port number
The UDP port number on which the target device is listening for SNMP
messages. If the target device is using a non-standard port for SNMP
operations, you must change this value.
PN 613-50662-00 Rev B Page 30 of 48