Aiwa CSD-TD20 - Manual (Page 6)

NOTE
• The unit may not play a CD-R/RW disc that is recorded on
personal computers or some kinds of CD-R/RW recorders
because of differences in recording platforms.
• Do not attach any seal or label to either side (the
recordable side or the labeled side) of a CD-R/RW disc. It
may cause malfunction.
• Do not load an unrecorded CD-R/RW disc. It will take over
30 seconds to read the disc. The disc may be damaged if
you try to open the disc compartment while reading the
disc.
• Do not use irregular shape CDs (example: heart-shaped,
octagonal ones).
It may result in malfunctions.
• Do not place more than one disc in the disc compartment.
• Do not try to open the disc compartment during play.
• Do not touch the lens. Doing so may cause malfunctions.
PROGRAMMED PLAY
Up to 30 tracks can be programmed from the disc.
1
In stop mode, keep s STOP/MEMORY pressed
until “M” flashes in the display.
2
Press r, t to select a track, then press
s STOP/MEMORY to store it.
3
Repeat step 2 to program other tracks.
To return to stop mode in steps 1 to 3, keep s pressed.
4
Press e to start play.
To check the program, press r or t in stop mode.
To clear the program, press s once in stop mode so that
“M” disappears in the display.
To change the programmed tracks, clear the program and
repeat all the steps again.
B
CD OPERATION
1
Press CD.
The power is turned on and the CD indicator lights up.
2
Press CD OPEN to open the disc
compartment. Place a disc with the printed
side up and close the disc compartment.
Total number of tracks and total playing time are
displayed. It will take about 15 seconds when loading a
CD-RW disc.
3
Press e PLAY/PAUSE/PRESET to start
play.
The number of the track being played and elapsed
playing time are displayed.
s STOP/MEMORY – Stops play.
e PLAY/PAUSE/PRESET – Pauses play. To resume
play, press again.
r , t SKIP/SEARCH – Searches for a particular point
during playback. Keep r or t pressed and then
release it.
– Skips to the beginning of a track. Press
r or t
repeatedly.
REPEAT/FM MODE/OSC – Repeats a single track or all
tracks. Select as follows.
[ 1: A single track is played repeatedly. Select a track
with r or t .
[ : All tracks are played repeatedly.
To start play when the power is off, press CD. The
power is turned on and play of the loaded disc begins
(Direct Play Function).
If you load a disc while the CD indicator flashes in step 2,
play starts without pressing
e .
After listening, press POWER 6 STANDBY to turn the
power off.
ENGLISH
5
CD OPEN
To listen with the headphones
Connect headphones with a stereo mini plug to the \ jack.
Track number
Programmed number