Integrating at-view plus 2.3 with openview, 7integrating at-view plus 2.3 with openview – Allied Telesis AT-VIEW PLUS 2.3 INSTALLATION User Manual
Page 17
Advertising
Allied Telesyn
AT-VIEW PLUS 2.3
INSTALLATION GUIDE
7
INTEGRATING AT-VIEW PLUS 2.3 WITH OPENVIEW
The AT-View Plus 2.3 installer automatically detects if HP OpenView is installed and will perform the
necessary integration so that AT-View Plus 2.3 can be started from within OpenView. After integration,
the “AT-View Plus” submenu is added to the “Tools” menu. “AT-View Plus” contains the options “Device
Manager” and “AMIGO”.
To start AT-View Plus for an Allied Telesyn device, follow the steps below:
1. Select an Allied Telesyn device on the network map.
2. Select Tools or right click on the device icon then choose AT-View Plus>Device Manager or AMIGO.
3. Device Manager or AMIGO will be launched.
PN 613-50508-00 Rev C
Page 17 of 26
Advertising