Disable portaccess – Allied Telesis AT-S39 User Manual
Page 161
Advertising
AT-S39 Command Line Interface User’s Guide
161
DISABLE PORTACCESS
Syntax
disable portaccess
Parameters
None.
Description
This command disables 802.1x port-based access control on the switch.
When disabled, supplicant end nodes can pass traffic through the switch
without logging on. The default settings for 802.1x port-based access is
disabled.
Note
This command must be performed from a local management
session.
Example
The following command disables port-based access control on your
switch:
disable portaccess
Advertising