Allied Telesis AT-S39 User Manual
Page 81
AT-S39 User’s Guide
81
5. Enter the port(s) where you want to specify a new MAC address limit.
You can specify the ports individually (e.g., 1,4), as a range (e.g., 4-7),
or both (e.g., 2-7,11,15).
The following prompt is displayed:
Enter new MAC limit -> [1 to 150] ->
6. Enter the maximum number of dynamic MAC addresses you want the
port to be able to learn and press Return. The range is 1 to 150
addresses. The default is 100.
7. Repeat this procedure starting with Step 4 to specify MAC address
limits on other ports.
8. Type S to select Save Configuration Changes.
9. Type 1 to select Display MAC Limits.
The current MAC address limits for all ports are displayed.
10. Examine the MAC limits. Check to be sure that they are correct. If you
assigned different values to different ports, be sure that the different
values apply to the correct ports. If necessary, repeat this procedure
to change any MAC address limits.