Allied Telesis AT-MR904TX User Manual
At-mr904tx, Installation guide
Advertising
Table of contents
Document Outline
- CentreCOM
- AT-MR904TX
- Electrical Safety and Installation Requirements
- AT-MR904TX Hub Description
- Hub Features
- Installations
- Installing a Standalone Hub
- Installing Cascaded Hubs
- Installing Stackable Hubs
- 1. Make sure that all of the unit’s power is turne...
- 2. Place the hubs on a flat surface.
- 3. For the first base hub, set the STACK ID switch...
- 4. Remove the two bracket screws from the right si...
- 5. Attach the two brackets, one to each opposite c...
- 6. Connect one end of the DB-15 proprietary cable ...
- 7. Attach the power adapter DC jacks to the hubs a...
- Troubleshooting
- Technical Specifications
- Where To Find Us