Allied Telesis FastSwitch8 User Manual
Errata for fastswitch8 installation guide
PN 613-10806-00 Rev C
Allied Telesyn International, Corp.
Errata for
FastSwitch8 Installation Guide
(PN 613-10784-00 Rev A)
Verifying FastSwitch8 Package Contents
A 10Base-T Ethernet Cable is not provided in the product package as
stated on page 7.
Rear Panel
The LanEdge FastSwitch8 rear panel shown in Figure 1 (on page 1)
and Figure 3 (on page 3) is incorrect. The correct panel is shown
below.
The rear panel of the switch consists of a Reset button, 8 speed/
duplex DIP switches, 8 (10/100 Mbps MDI-X) (Media Dependent
Interface with Crossover) ports, an Uplink switch for Port 8 (MDI),
and a power adapter connector, as shown below.
Copyright
1999 Allied Telesyn International, Corp. 960 Stewart Drive Suite B, Sunnyvale CA 94086 USA
All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn International, Corp.
RESET
1
2
3
4
5
6
7
8
DC Power
10/100M Ports (MDI-X)
Uplink /
Adapter
Normal
DIP
Reset
Settings