Allied Telesis AT-S31 - Manual (Page 49)

AT-S31 Version 1.0.1 User’s Guide
49
'LVDEOLQJ RU (QDEOLQJ DQ $FFHVV 0HWKRG
There are different ways you can access the Omega interface, locally or
through a Telnet or SNMP management utility. You can disable one or
more of these methods to enhance the security of the chassis by
preventing unauthorized changes to the module and port
configurations.
To enable or disable an Omega access method, perform the following
procedure:
1. From the Main Menu, choose System Configuration.
The System Configuration Menu is displayed.
2. Select Omega Options.
The Omega Options Menu is displayed.
3. Adjust the settings as required.
The Omega access methods are described below:
Local Omega Enabled
Disabled Local Omega
These two selections allow you to control whether the Omega
interface can be accessed by connecting a terminal or PC to the
RS-232 port on the management module. This is referred to as
accessing the program locally. The default for this access method is
enabled.
Remote Omega Enabled
No Remote Omega
Accessing Omega remotely is accomplished with the Telnet program
or an SNMP management program, such as HP Openview. The default
for this access method is enabled.
4. Return to the Main Menu.
5. Select Quit.