Allied Telesis AT-S24 - Manual (Page 98)

Configuring the MAC Address Table
98
The Adding a Multicast Address window in Figure 49 is displayed.
Figure 49 Adding a Multicast Address Window
5. Select the VLAN Name field and enter the name of the VLAN to
receive the multicast frames. Select Enter or press <Return>.
6. Select the MAC Address field and enter the MAC address of the
multicast stream that will be sending the multicast frames. Select
Enter.
7. Select the Ports for Multicast field and enter one or more port
numbers that are members of the specified VLAN and that are to
receive the multicast packets. Select Enter or press <Return>.
You can use one of the following formats to specify the port numbers:
Single port (for example, 1)
Several ports separated by a comma (for example, 3, 5, 6)
Range of ports (for example, 2-4)
All ports by entering the word “all”.
You can combine these different formats in a single line.
A port can have more than one multicast address associated with it.
The number of multicast addresses you can configure is limited to ten
per switch.
After several seconds, a confirmation message is displayed.
8. Return to the Main Menu.