Setting baud rates, Menu, The default is automatic baud rate detection – Allied Telesis AT-S20 User Manual
Page 50: Table42 fixed baud rates, Setting baud rates -20, 6hwwlqj#%dxg 5dwhv
Advertising
Setting Up a VT100
4-20
6HWWLQJ#%DXG
5DWHV
0HQX1#
System configuration> Terminal
Configuration> Generic dumb terminal> (Data rate
baud rate)...
Note
The default is automatic baud rate detection.
You can also select from the following fixed baud rates. Allied
Telesyn recommends 9600 bps.
Table 4-2 Fixed Baud Rates
19200 bps
600 bps
9600 bps
300 bps
4800 bps
150 bps
2400 bps
75 bps
1200 bps
Advertising