Hubbardton Forge 101474 - Manual

Glass Installation Instructions
A32
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 14530 Rev A
For Chandeliers with Center Glass
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
To Install Glass
1. Refer to Figure 1 and remove threaded cap (C) and check
ring (B) from bottom of fixture.
2. Carefully slide candle assembly up stem, guiding the cord
up through fixture loop (Figure 2).
3. Insert glass into fixture by tipping it and moving it up
around candle cluster then setting it down into the bottom
of the fixture. Make sure straight end of glass is oriented
down (Figure 3).
4. Gently lower candle cluster back down into glass, guiding
the cord back through the fixture loop.
5. Secure candle cluster by replacing check ring and threaded
cap.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you
purchased this product. We hope you enjoy your fixture!