Hubbardton Forge 137523 - Manual (Page 4)

Assembly & Installation Instructions
A136
For Ellipse Pendants 13-7523 & 137523F Page 4 of 4
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 21041 Rev B
To Install Glass (Figure 6)
Component Parts
R Socket (3)
S Glass (3)
T Retaining Ring (3)
U Socket
Tool
1. Remove retaining rings (T) from sockets (S). Retaining rings
are shipped installed on product.
2. Slip glass (S) over socket (R).
3. Thread retaining ring (T) onto socket using socket tool
provided (U) until it rests on inside of glass (S). Do not over
tighten.
4. Install light bulbs and restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 6)