Hubbardton Forge 138805 User Manual

A333, Assembly & installation instructions

Advertising
background image

Assembly & Installation Instructions

A333

Apparatus Pendant 138805

Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

28307

To Install to Ceiling

(Figure 1)

Component Parts

A Fixture
B Rod
C Ball (2)
D Nipple
E Cupped washer
F Ground Screw
G Cover Plate
H Oval Nut


Caution: Be sure power is off at the main breaker
box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Remove ball (C) from one end of the rod (B).

Slide rod (B) through hole in fixture (A) and
replace ball (C).

3. Thread wires from junction box down through

mounting plate on fixture (A).

4. Raise fixture to ceiling aligning holes in

fixture (A) with holes in electric box. Using
two machine screws (not provided) fasten the
fixture (A) to the electric box using outer oval
slots to orient fixture to desired hanging
position.

Note: A new electric box comes with screws.
When replacing an existing fixture retain
screws for use with the new fixture.

5. Thread nipple (D) into center of mounting

bracket on the fixture (A).

6. Using suitable wire connectors (not provided)

connect fixture wires to supply (white to white
and black to black). Using cupped washer (E)
and green ground screw (F) run pigtail from
fixture (A) to junction box. Connect all ground
wires, bare copper or green to bare copper or
green, including fixture ground wire. Push wires back into fixture.

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

7. Slip cover plate (G) over nipple (D) and secure using oval nut (H).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

Advertising
Table of contents