Hubbardton Forge 138801 - Manual

Assembly & Installation Instructions
A327
Apparatus Pendant 138801 Page 1 of 4
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 28105
To Install to Ceiling (Figure 1)
Component Parts
A Fixture
B Rod
C Ball (2)
D Nipple
E Cupped washer
F Ground Screw
G Cover Plate
H Oval Nut
Caution: Be sure power is off at the
main breaker box prior to installation.
1. Carefully unpack the fixture from the
carton.
2. Remove ball (C) from one end of the
rod (B). Slide rod (B) through hole in
fixture (A) and replace ball (C).
3. Thread wires from junction box
down through mounting plate on
fixture (A).
4. Raise fixture to ceiling aligning holes
in fixture (A) with holes in electric
box. Using two machine screws (not
provided) fasten the fixture (A) to the
electric box using outer oval slots to
orient fixture to desired hanging
position.
Note: A new electric box comes with
screws. When replacing an existing
fixture retain screws for use with the new
fixture.
5. Thread nipple (D) into center of mounting bracket on the fixture (A).
6. Using suitable wire connectors (not provided) connect fixture wires to supply (white to white and black to black).
Using cupped washer (E) and green ground screw (F) run pigtail from fixture (A) to junction box. Connect all
ground wires, bare copper or green to bare copper or green, including fixture ground wire. Push wires back into
fixture.
Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.
7. Slip cover plate (G) over nipple (D) and secure using oval nut (H).
(continued)
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.
This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
(Figure 1)