Hubbardton Forge 205923 - Manual

Glass Installation Instructions
B42
Page 1 of 2
Please refer to fixture assembly and installation instructions prior to glass installation.
Component Parts
A Glass
B Nylon Screw (fixtures using two pieces of glass only)
C End Cap
D Nut (3)
To Mount Glass to Frame
1. Slide Glass (A) into frame with one end snug against center divider.
2. For fixtures using one piece of glass, skip to step 5. For fixtures using two pieces of glass, tighten nylon screw (B)
against glass, keeping glass centered in the frame.
3. Insert studs on end cap (C) through holes in frame and secure with nuts (D) making sure glass remains centered in
frame. End cap should hold the glass securely in position, but do not over tighten the nuts.
4. For fixtures using two pieces of glass, repeat the process for the second piece.
5. For fixtures using one piece of glass, install the second end cap, making sure glass remains centered in the frame.
6. Refer to frame mounting instructions on the other side of this sheet to complete the installation.
(continued)
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 15647