Hubbardton Forge 206301 - Manual

Installation Instructions
B161
For Sconces 20-6301L, 20-6301R, 20-6301EL & 20-6301ER Page 1 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 20883 Rev A
For fixtures requiring assembly, please refer to assembly instructions before installation.
Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all
applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.
To Mount Fixture to Wall (Figure 1)
Component Parts
A Crossbar
B Fixture
Assembly
C Screws (2)
D Ground Screw
Caution: Be sure power is off at the main breaker box
prior to installation.
1. Carefully unpack the fixture from the carton.
2. Using two machine screws (not provided), fasten the
crossbar (A) to the electric box making sure that
fixture mounting holes are level.
Note: A new electric box comes with screws. When
replacing a fixture, retain the existing screws for use
with the new fixture.
3. Hold the fixture assembly (B) close to the wall and
using suitable wire connectors, not provided, connect
fixture wires to supply (white to white or ribbed and
black to black or smooth). Run a pigtail lead from
crossbar ground screw (D) to the junction box and
connect all ground wires (bare copper or green to bare
copper or green).
Caution: Make sure wire connectors are twisted on
securely, and no bare wire is exposed.
4. Carefully tuck all wires behind the crossbar (A) and
place the fixture assembly (B) over the crossbar so the
holes in the top and bottom match the threaded holes in the
crossbar. Secure the fixture by threading the screws (C)
through the holes in the fixture assembly (B) and into the
crossbar (A) using supplied allen wrench.
5. See instructions on next page to install glass.
(continued)
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.
This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
This illustration represents a typical fixture
and may not match every style.
(Figure 1)