Hubbardton Forge 203035 - Manual (Page 2)

Assembly & Installation Instructions
B269
Flora Sconce 20-3035 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 27571
To Install Single Glass Option
(Figure 2)
Component Parts
I Socket
J Bulb
K Glass
L Retaining
Ring
M Retaining Ring Tool
1. Remove retaining ring (L) from socket (I). Retaining ring ships installed.
2. Install light bulb (J). Be careful not to touch bulb with bare hands; oil from the
hands will dramatically reduce bulb life.
Note: The bulb included is based on our design preference; see the fixtures
wattage sticker for Max wattage information.
3. Slip glass (K) over socket (I) and tighten retaining ring (L) with retaining ring
tool (M). Be sure not to over tighten.
4. Restore electricity at main breaker.
To Install Double Glass Option
(Figure 3)
Component Parts
I Socket
J Bulb
K Glass
L Retaining
Ring
M Retaining Ring Tool
N Inner
Glass
1. Remove retaining ring (L) from socket (I). Retaining ring ships installed.
2. Install light bulb (J). Be careful not to touch bulb with bare hands; oil from the
hands will dramatically reduce bulb life.
Note: The bulb included is based on our design preference; see the fixtures
wattage sticker for Max wattage information.
3. Place inner glass (N) into glass (K) and slip both over socket (I) and tighten
retaining ring (L) with retaining ring tool (M). Be sure not to over tighten.
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the
dealer from which you purchased this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation,
lamping or use of this fixture.
(Figure 3)
(Figure 2)