Hubbardton Forge 204104 - Manual

Installation Instructions
B181
For Ribbon Double Glass Wall Sconce 20-4104 Page 1 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 22767
Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all
applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.
To Mount Fixture to Wall (Figure 1)
Component Parts
A Fixture Assembly
B Screw Cap
C Threaded Nipple
D Lock Nut
E Crossbar
To Install
Caution: Be sure power is off at the main breaker box prior to installation.
1. Carefully unpack the fixture from the carton.
2. Using two machine screws (not provided) attach
crossbar (E) to the electric box.
Note: A new electric box comes with screws. When
replacing a fixture, retain the screws for use with
the new fixture.
3. Thread the nipple (C) into the crossbar (E) and
secure with lock nut (D). Adjust the nipple to
proper length to ensure the fixture will fit snugly to
the wall.
4. Using suitable wire connectors (not provided),
connect the fixture wires to the supply wires, (white
to white, black to black, bare copper or green to
bare copper or green). If the fixture is wired with
twin lead lamp cord, connect the ribbed side to
white, and the smooth side to black.
Caution: Make sure wire connectors are twisted
on securely and no bare wires are exposed.
5. Carefully tuck all wires behind the fixture, place
fixture firmly against the wall and fasten screw cap (B).
(continued)
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.
This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
(Figure 1)