Hubbardton Forge 204210 - Manual

Installation Instructions
B196
For Wall Sconce 20-4010, 20-4210 & 20-4220 Page 1 of 1
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 23193
Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all
applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.
After installation extra hardware and accessories are possible; our kits are used on multiple products and options.
To Mount Fixture to Wall (Figure 1)
Component Parts
A Fixture
B Screw
Cap
C Nipple
D Lock
Nut
E Crossbar
F Ground
Screw
Caution: Be sure power is off at the main breaker box
prior to installation.
1. Carefully unpack the fixture from the carton.
2. Using two machine screws (not provided) attach
cross bar (E) to the electric box.
Note: A new electric box comes with screws.
When replacing a fixture, retain the screws for use
with the new fixture.
3. Thread the nipple (C) into the crossbar and secure
with lock nut (D). Adjust the nipple to proper length
to ensure the fixture will fit snugly to the wall.
4. Using suitable wire connectors (not provided), connect
the fixture wires to the supply wires, (white to white,
black to black, bare copper or green to bare copper or green).
Ground the crossbar using the green ground screw (F) to secure a pigtail lead to the bracket.
If the fixture is wired with twin lead lamp cord, connect the ribbed side to white, and the smooth side to black.
Caution: Make sure wire connectors are twisted on securely and no bare wires are exposed.
5. Carefully tuck all wires behind the fixture, place fixture firmly against the wall and fasten screw cap (B).
6. Install light bulb.
7. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
This illustration represents a typical
fixture and may not match every style.
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.
This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
Figure 1